A large hay stock to feed your livestock during winter is recommended. It is great concern that most of the farmers face hardships in the storing of hay. Bailing of hay is considered as the best method when it comes to storing of hay. There is an expanded market for drive tractors due to the increased demand for hay. Additionally, Kansas City Hay Bailing is not an easy job for most people. The right weather conditions is also a key factor to consider. When participating in the making of hay bales, the following steps should be followed.
Making sure that the grass is ready to be cut and turned to bales is important.When the grass has reached its growth peak; it is important to mow it. Immediately the grass has been cut; it should be given time for the curing process. The present weather conditions and the grass weight are factors that influence curing. The raking using a hay rake should also follow.When raking is done, one or two rows are usually created. Next, a farmer is supposed to attach the baler to the tractor.Practices such as greasing and ensuring that all the belts are tight in the right way are important. You are then required to load the bale twine on the tractor. It is usually done so that it can help hold the hay together.
You should then check the readiness of the windrowed hay to be bailed.Wet clamps should not be present in the windrowed hay.When the hay has a crispy feel; it is usually ready to be bailed. After you have positioned the tractor and the windrow, you can then move on the down side. It is recommended that if hay is not reaching the entry chamber, one should try weaving forward and backward. It is wise for a farmer who is always bailing to keep checking the indicator lights. The indicators will aid in knowing the time when you should tie the bale released. An important feature known as bit is recommended for the process to take place. It is the place where the bale drops after the bailing process. To manage to make bales in the right way, the process stated above should be embraced faithfully.You should also carry out the steps around the whole field. At times, the baler can get clogged by hay. However, you don’t need to worry as long as the safety chocks are in place. Kansas City Brush Hogging is a wise process to ensure that your product is readily available to be bought in the market. It is wise to follow the above steps for a positive result.